Code Entry; Library Code Entry - RCA RCU900RF User Manual

Universal learning remote with touchscreen

Table of Contents

Code Entry

In order for the RCU900RF to control your devices (TV, VCR, DVD,

etc.), you must program it with the library code for each device.

This enables the RCU900RF remote to control your device with the

proper commands. If your TV, VCR, DVD, or satellite receiver is

an RCA, ProScan or GE brand, the RCU900RF may not need any

programming to control them. To program the remote with the

codes for your devices, you can use one of three methods:

Library Code Entry, Code Search or Code Autosearch.

You can enter codes in your RCU900RF from the Code List using

the SETUP key on the rubber keypad. (

the Code List of the

See

most popular brands on page 29.) When you enter a valid code

for any given mode (e.g., when you enter a code for a TV), the

Default Key Label Screen is used and any previously Learned

functions for that mode are deleted. The mode is reset to its

power-on default state. However, Macro settings remain

unchanged and now include the new code just entered.

Table of Contents