Advertisement
Brand Code Search
The Brand Code Search goes through only the codes for one of
the select brands listed in the accompanying code list. If your
brand of device is listed, this search can be very quick and easy.
TIPS: Each device key is associated with a type of device—
a device key for a different type of device, see the Changing
section.
programming, giving you feedback at each stage of the
process.
Code Search, press the
key.
1.
Manually turn on the device you
want to control.
2.
Brand Code list section of the
accompanying code list. Circle
the number for your brand and
keep the list handy.
3.
you're holding down the device key, use your other hand
time.
4.
release both keys.
5.
Look at the number you circled for
your device's brand code number.
Press that number on the remote
keypad.
6.
Point the remote directly at the
front panel of the device you want
remote and wait 2 seconds. The
remote is testing a single code for
your device's brand.
Did your device turn off?
YES: Press the STOP key to store the code. You're done!
You've programmed this device key.
NO:
for your brand.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the device
section below for more information.
blinks four times and turns off, and the last programmed
different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the device's functions with the remote. If
some device features don't work, go to the next step to try
a different code.
2.
the device turns off for the first time, don't press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the key's functionality again by attempting to control
a variety of the device's functions. If the code that has
been stored controls the majority of the device's functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. It's not as easy as the other
methods, but it's potentially the fastest method.
TIP:
Each device key is associated with a type of device—the
device key for a different type of device, see the Changing a
section.
programming, giving you feedback at each stage of the
process.
1.
Manually turn on the device you
want to control.
2.
the remote. Locate the section for
the type of device you're trying to
program, and find your brand in
that section. Circle the codes for
your brand and keep them handy.
3.
Press and hold the device key you want to program (the
hand enter the first five-digit code for your brand in the
4.
YES: You're done! You've
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
key repeatedly
NOTES
provided in the Code Retrieval section of this manual.
If you release the device key any time during the Direct Code
device key is retained.
Test the remote with the device to make sure the device
in the list.
Manual Code Search
The Manual Code Search lets you go one-by-one through all
the one that operates your device, you can stop the search and
store that code.
TIPS:
programming, giving you feedback at each stage of the process.
Each device key is associated with a type of device—the TV is
a different type of device, see the
Type section.
The Manual Code Search method may take a long time
because the remote searches through all of the codes in
the Direct Code Entry method.
1.
2.
3.
4.
programmed this device key.
You have
NO
Thr
poi
the
Tes
sec
Du
blin
The
a d
Test
1. T
2.
3. O
4. T
M
w
y
t
r
P
s
T
s
s
t
k
u
u
t
f
f
d
Advertisement
