Asko T884HPXL Operating Instructions Manual page 25

DOOR HANGING
You can choose whether the door is hung on the right or
the left.
Follow these instructions:
1. Remove the plinth.
2. Remove the hinge, two screws
3. Lift the door up and remove it. Support the door at
the same time.
4. Remove both door pins (top and bottom). Fit them on
the other side of the machine. Replace the hinge.
5. Also change the hole plug (A) (on top) and the door
hinge bushing (B) (at the top and on the bottom), and
replace them on the other side of the door.
(A)
Use a fl at screwdriver to remove the plugs.
NOTE!
Be careful not to damage the appliance with the
screwdriver.
pin
(B)
Customer Care Center, 1-800-898-1879, www.askousa.com
6. Loosen and remove the catch (lift up and pull out)
and the cover plate on the door and the machine.
Switch the catch and the cover plate.
1
2
7. Refi t the door by loosening the hinge screws slightly,
affi xing the door and closing it. Retighten the hinges.
Replace the plinth.
25