Onkyo TX-NR6100 Instruction Manual page 119

4. Source
OPTICAL When giving priority to input signal from DIGITAL IN OPTICAL
jacks
• This item can be selected only when the input to be set
is assigned to the OPTICAL jack in the "1. Input/Output
Assign" - "Digital Audio Input" setting.
Analog When giving priority to the input signal from AUDIO IN jacks
• This item can be selected only when the input to be set
is assigned to the AUDIO IN jack in the "1. Input/Output
Assign" - "Analog Audio Input" setting.
‰ PCM Fixed Mode (Default Value: Off)
Select whether to fix input signals to PCM (except multi-channel PCM) when
you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set
this item to "On" if noise is produced or truncation occurs at the beginning of a
track when playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed, the setting is restored to
"Off".
• The setting cannot be changed when "TUNER", "NET", or "BLUETOOTH"
input is selected.
„ Video Select
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the
input from which video is displayed on the TV.
‰ Video Select (Default Value: Last)
Last Select the video input played immediately prior.
BD/DVD, Play the video of each input.
GAME, • This setting is effective for an input selector which is
CBL/SAT, assigned in "1. Input/Output Assign" - "HDMI Input".
STRM BOX,
PC,
CD,
TV,
PHONO
• If the OSD language is set to Chinese, you can only select this setting when
"TUNER" is selected as input. (European, Australian, Asian and Taiwanese
models)
Setup Setup
119