Onkyo TX-NR6100 Instruction Manual page 118

4. Source 4. Source
„ 1. My Input Volume
Set a volume value for each input selector.
‰ My Input Volume (Default Value: Last)
Select a value from "Last", "Min", "0.5" to "81.5" and "Max". (When "Volume
Display" is set to "Absolute")
• The volume level when the power is turned on is the value set for "Power On
Volume".
• To set the volume to the current volume, press the button of the input
selector you wish to set for approx. 3 seconds.
„ 2. Name Edit
Set an easy name for each input. The set name appears on the main unit's
display. Select the input selector to make the setting.
‰ Name Edit (Default Value: Input name)
1. Select a character or symbol with the cursors, and press ENTER.
Repeat this operation to input up to 10 characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the
remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller will remove all the input
characters.
2. After inputting, select "OK" with the cursors, and press ENTER.
The input name will be saved.
To restore the name to the default value, press CLEAR on the remote
controller on the input screen. Then while nothing is entered, select "OK", and
press ENTER.
• To name a preset radio station, press TUNER on the remote controller, select
AM (North American, Australian, Taiwanese and Asian models)/FM and select
the preset number. (Preset names cannot be given to DAB stations (European
models))
• This cannot be set if the "NET" or "BLUETOOTH" input is selected.
„ Audio Select
Select the priority for input selection when multiple audio sources are connected
to one input selector, such as connections to both the "BD/DVD" HDMI IN jack
and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each
input selector button. Select the input selector to configure. Note that there are
some default values you cannot change.
‰ BD/DVD (Default Value: HDMI)
GAME (Default Value: HDMI)
CBL/SAT (Default Value: HDMI)
STRM BOX (Default Value: HDMI)
PC (Default Value: HDMI)
AUX (Default Value: HDMI)
CD (Default Value: Analog)
PHONO (Default Value: Analog)
TV (Default Value: OPTICAL)
ARC When giving priority to input signal from ARC compatible TV.
• The setting can be selected only when "5. Hardware" -
"HDMI" - "Audio Return Channel (eARC supported)" is set to
"On" and also the "TV" input is selected.
HDMI When giving priority to input signal from HDMI IN jacks
• This item can be selected only when the input to be set is
assigned to the HDMI jack in the "1. Input/Output Assign" -
"HDMI Input" setting.
COAXIAL When giving priority to input signal from DIGITAL IN COAXIAL
jacks
• This item can be selected only when the input to be set
is assigned to the COAXIAL jack in the "1. Input/Output
Assign" - "Digital Audio Input" setting.
Setup Setup
118