Table of Contents
Advertisement
allowed, but you can choose to block one or more of these devices from accessing the
network.
To enable and manage the network access control list for the entire network and
allow or block connected devices:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Select the Turn on Access Control check box.
You must select this check box before you can select an access rule and use the
Allow and Block buttons. When the Turn on Access Control check box is cleared, all
devices are allowed to connect, even if a device is on the list of blocked devices.
6. Click the Apply button.
Your settings are saved. Network access control is enabled.
7. Select an access rule to apply to new devices:
• Allow all new devices to connect: With this setting, if you connect a new device
to the network, it can access the network. You do not need to enter its MAC
address on this page. This option works for most home networks. You can also
block one or more devices from accessing the network. For more information,
see the following step.
• Block all new devices from connecting: With this setting, if you want to allow
a new device to connect, you must enter its MAC address on this page. (In this
situation, a new device is a device that was not previously connected to the
network.) For more information about allowing one or more devices, see the
following step.
If you block all new devices from connecting, the device that you are currently
using to connect to the router web interface, any other devices that are currently
connected to the network, and all devices that were allowed to connect to the
network in the past are still allowed access. That means that these devices are
automatically added to the network ACL as allowed devices. If you want to block
any of these devices, see the following step.
Control Access to the Internet
4-Stream AX1800 WiFi 6 Router Model RAX20
43
User Manual
Advertisement
Table of Contents
