Set Up Https Access Through The Internet - NETGEAR RAX20 User Manual

The default port is number 21. Password protection is enabled by default. We
recommend that you keep password protection enabled.
6. Click the Apply button.
Your settings are saved.
The link that lets you access the device over the Internet is
ftp://public-ip-address/shares. In this link, public-ip-address represents one of the
following:
• The IP address that is assigned to the router's Internet port. You can view this IP
address on the ADVANCED Home page.
• If you set up a DDNS account, the router's DNS name, for example,
yourname.mynetgear.com.
7. To limit read and write access of a device to the admin user, select a device in the
Available Network Folder's section.
If only one device is connected, it is automatically selected.
8. Click the Edit button.
The Edit page displays.
9. From the Read Access menu, select admin.
10. From the Write Access menu, select admin.
11. Click the Apply button.
Your settings are saved.

Set up HTTPS access through the Internet

To set up HTTPS access through the Internet:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Functions > ReadySHARE Storage.
Use Dynamic DNS to Access USB
Storage Devices Through the
Internet
4-Stream AX1800 WiFi 6 Router Model RAX20
121 User Manual