Section 4: Set Up; Unpacking; Inventory - Grizzly H5697 Instruction Manual

The Model H5697 is a
heavy machine (106 lbs.
shipping
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.

Unpacking

Your machine left our warehouse in a carefully
packed crate or box. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of the shipment, you should inventory the
equipment.
H5697 Cement Mixer

SECTION 4: SET UP

This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations BEFORE
starting the machine!
Wear safety glasses dur-
ing the entire set up
process!
weight).
After all the parts have been removed from the
carton, you should have:
Stand Pieces (Figure 2)
A. Slide Braces ................................................2
B. Cross Braces ..............................................2
C. Left Front Leg..............................................1
D. Right Front Leg ..........................................1
E. Left Rear Leg ..............................................1
Right Rear Leg............................................1
F.
G. Corner Braces ............................................4
H. Hardware Bag (see list below)....................1
H
DO
G
Hardware Bag Inventory (use page 9 to identi-
fy hardware)
• Hex Bolt M10-1.5 x 70 ................................2
• Hex Bolt M10-1.5 x 30 ................................2
• Hex Bolt M10-1.5 x 25 ................................4
• Hex Bolt M10-1.5 x 20 ................................4
• Carriage Bolt M10-1.5 x 25 ........................4
• Ext Tooth Washer 10mm ..........................16
• Hex Nut M10-1.5 ......................................16
• Hex Bolt M8-1.25 x 25 ................................8
• Hex Bolt M8-1.25 x 20 ..............................10
• Hex Bolt M8-1.25 x 16 ................................8

Inventory

A B C
Figure 2. Stand Pieces.
D E F
-7-