Connections - Sp-Ps(2); Important Device Settings - Sharp NEC SP-AS User Manual & Installation Manual

CONNECTIONS - SP-PS(2)

IMPORTANT DEVICE SETTINGS

Display:
1. Connect the soundbar speakers:
Connect the audio cables to the speaker terminals on the side of the Display. Red
terminal is plus(+) and black terminal is minus(-). *(Label on the wires for Right and
Left Channel)
2. Activate the external speakers: Push the button "Internal/External speaker switch"
below the speaker terminals on the monitor to enable the external speakers.
User Manual & Installation Guide
NEC Soundbar / NEC Collaboration Soundbar
ABi - Ver. 1.0 - 20201220
6
Sharp NEC Display Solutions Europe