Sound Bar Connections To Tvs - Sharp HT-SB32D Operation Manual

Sound bar connections to TVs

Caution:
Turn off all other equipment before making any connections.
Notes:
● To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the
rear of the sound bar.
● Refer the operation manual of the equipment to be connected.
● Fully insert the plugs to avoid fuzzy pictures or noises.
● If the TV volume is continuously at low level, the sound bar will automatically
power off. Increase the TV output volume to enjoy the sound from the speaker.
■ Connecting a TV, or DVD player, etc.
If the TV/monitor has an audio or optical output, connect it to the AUDIO IN socket
or OPTICAL IN socket on the rear of the sound bar.
Press the INPUT button repeatedly to select:
Function
OPTICAL IN
AUDIO IN
Bluetooth
TV
or
Blu-Ray/DVD player/
Digital Tuner
Optical digital
audio cable
Sound bar
On/Standby/Input
Indicator
Turns green
Turns cyan
Turns blue
To audio output terminals
To optical
digital audio
output
terminal
To OPTICAL IN
(optical) input
terminal
Audio cable
(commercially
available)
To AUDIO IN
input terminal
9