Lexus RX 450h 2010 Owner's Manual page 86

Hide thumbs Also See for RX 450h 2010:

Table of Contents

Linking driving position memory with door unlock operation

Record your driving position to button "1", "2" or "3" before performing

the following:

Carry only the key (including the card key) to which you want to link the

driving position. If 2 or more keys are in the vehicle, the driving position

cannot be linked properly.

Shift the shift lever to P and close the driver's door. Turn the

"POWER" switch to ON mode.

Operating the driving position memory after turning the "POWER" switch off

Memorized positions (except for the steering wheel position) can be activated up

to 180 seconds after the driver' s door is opened and another 60 seconds after it is

closed again, even after turning the "POWER" switch off.

Canceling the linked door unlock operation

Turn the "POWER" switch to ON mode and close the driver's door.

While pressing the "SET" button, press the driver' s door lock switches

(either lock or unlock) until the signal beeps.

1-4. Adjustable components (seats, mirrors, steering wheel)

Press the desired button ("1", "2" or

"3") to recall the position. Then,

while keep pressing the button,

press the driver's door lock

switches (either lock or unlock)

until the signal beeps.

The driving position is recalled

when the driver's door is unlocked

using the entry function or wireless

remote control and the driver's

door is opened.