Table of Contents
Advertisement
34
en | Technical data
Amplifier model
Power Requirements
Power Consumption
1/8 Maximum Output Power @ 4 Ω
Mains Fuse
Protection
Cooling
Ambient Temperature Limits
Safety Class
Color
Dimensions (W x H x D), mm
Weight
Remote Power ON/GPIO
(C Series only)
Signal Processing
Optional
Test signal for max. output power according IHF-A-202 (Dynamic-Headroom, burst 1 kHz/20
ms on/480 ms off/low level -20 dBu).
Input power exceeds 1.1 times rated power consumption with 2 Ω load in Dual mode or 4 Ω
load in Bridged mode.
8.1
C Series direct drive output power
Model
C3600FDi
C2800FDi
C1800FDi
C1300FDi
Table 8.1: C Series Direct Drive Output Power
C3600FDi is the recommended amplifier for 100V Direct Drive. Amplifier operated in Dual
1
Channel mode.
C2800FDi is the recommended amplifier for 70V Direct Drive. Amplifier operated in Dual
2
Channel mode.
2017.05 | 01 | F.01U.327.801
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
240 V/230 V: T15AH; 120 V/100 V: T30AH
Audio limiters, high temperature, DC, HF, Back-EMF, Peak current
limiters, Inrush current limiters, Turn on delay
+5°C to +40°C (40°F to +105°F)
Power remote via switch, delay time selectable
Floating relay contacts (show protect mode)
Max. Wattage Dual Chanel
70V Operation
100V Operation
2 x 1250 W
2 x 2500 W
2 x 1250 W
2
2 x 2500 W
2 x 1250 W
n.a.
n.a.
Installation manual
L Series and C Series FIR-Drive Power
L3600FD/C3600FDi
850 W
Front-to-rear, 3-stage-fans
I
Black
483 x 88 x 462.4
18.2 kg (40.1 lb)
Inputs for preset selection
FIR Filters, Audio Limiters
Output delay per channel,
31 band GEQ per channel,
PEQ per channel,
Load impedance
PC remote control software
Max. Wattage Bridged Mode
70V Operation
Not recommended
1
Not recommended
1 x 600 W
1 x 600 W
Bosch Sicherheitssysteme GmbH
Amplifiers
100V Operation
1 x 1250 W
n.a.
Advertisement
Table of Contents
