Epson WF-C878RDWF User Manual page 506

Administrator Information
Configuring Default Policy
To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
printer. For more fine-grained control over users and groups of users, configure group policies.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Basic.
2. Enter a value for each item.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 348
&
Default Policy Setting Items
Default Policy
Items
IPsec/IP Filtering
❏ Access Control
Configure a control method for traffic of IP packets.
Items
Permit Access
Refuse Access
IPsec
>
Advanced Security Settings
Settings and Explanation
You can enable or disable an IPsec/IP Filtering feature.
Settings and Explanation
Select this to permit configured IP packets to pass through.
Select this to refuse configured IP packets to pass through.
Select this to permit configured IPsec packets to pass through.
506
>
Encrypted Communication Using IPsec/IP Filtering