Table of Contents
Advertisement
Product Information
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
USB I/F Timeout Setting:
Specify the length of time in seconds that must elapse before ending USB communication with a
computer after the printer receives a print job from a PostScript printer driver or PCL printer driver.
If the job ending is not clearly defined from a PostScript printer driver or PCL printer driver, it can
cause endless USB communication. When this occurs, the printer ends communication after the
specified time has elapsed. Enter 0 (zero) if you do not want to end communication.
Related Information
"Loading Paper" on page 37
&
"Printing Using Easy Settings" on page 48
&
"Printing JPEG Files from a Memory Device" on page 92
&
"Printing TIFF Files from a Memory Device" on page 93
&
Network Settings
Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
Router:
❏ Wi-Fi Setup Wizard
❏ Push Button Setup(WPS)
❏ Others
❏ PIN Code Setup(WPS)
❏ Wi-Fi Auto Connect
❏ Disable Wi-Fi
Wi-Fi Direct:
❏ iOS
❏ Android
❏ Other OS Devices
>
>
Settings Menu List
You may be able to resolve network problems by disabling the Wi-Fi settings or making
the Wi-Fi settings again. Tap
Disable Wi-Fi > Start Setup.
General Settings
> Router > Change Settings > Others >
358
Advertisement
Table of Contents
