Wall Mounting - Panasonic KX-TDE110 Installation Manual

3.9.8

Wall Mounting

Mounting the KX-T0151/KX-TDA0152
WARNING
• MAKE SURE THAT THE WALL THAT THE UNIT WILL BE ATTACHED TO IS STRONG
ENOUGH TO SUPPORT THE UNIT (APPROX. 310 g [11 oz]). IF NOT, IT IS
NECESSARY FOR THE WALL TO BE REINFORCED.
• ONLY USE THE WALL-MOUNTING EQUIPMENT (SCREWS, WASHERS, WALL
MOUNTING PLATE) INCLUDED WITH THE UNIT.
• WHEN DRIVING THE SCREWS INTO THE WALL, BE CAREFUL TO AVOID
TOUCHING ANY METAL LATHS, WIRE LATHS OR METAL PLATES IN THE WALL.
• WHEN THIS PRODUCT IS NO LONGER IN USE, MAKE SURE TO DETACH IT FROM
THE WALL.
1.
Place the reference for wall mounting (KX-T0151/KX-TDA0152) on the wall to mark the 2 screw
positions.
2.
Install the 2 screws and washers (included) into the wall.
Notes
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3.
Insert the upper and lower tabs of the wall mounting plate into the designated openings in the base unit.
KX-T0151/KX-TDA0152
3.9 Connection of 2.4 GHz Portable Stations
Tabs
Installation Manual 149