4.3.7 Installation Location Checklist
Use this checklist to ensure you have selected the correct location for the water heater.
□
The water heater is not exposed to corrosive compounds in the air.
□
The water heater location complies with the required clearances.
□
The planned combustion air and exhaust termination locations meet the required
clearances.
□
The water supply does not contain chemicals or exceed total hardness that will damage
the heat exchanger.
□
A standard 3 prong 120 VAC, 60 Hz properly grounded wall outlet (for internal/indoor
models) or other 120 VAC, 60 Hz source is available.
□
The installation must conform with local codes or, in the absence of local codes, with
the National Fuel Gas Code, ANSI Z221.3/NFPA 54, or the Natural Gas and Propane
Installation Code, CSA B149.1
Rinnai Tankless Water Heater Installation and Operation Manual
23