License Plate Lamp; Replacement Bulbs; Vehicle Care - Chevrolet 2011 Malibu Owner's Manual

10-34

Vehicle Care

4. Turn the bulb socket (B)
counterclockwise to remove from
the lamp assembly.
5. Pull the bulb (A) from the
socket (B).
6. Install the new bulb.
7. Reverse Steps 1 through 4 to
reinstall.

License Plate Lamp

To replace the license plate
lamp bulb:
1. Remove the license plate bezel
assembly by turning the two
screws counterclockwise.
2. Turn and pull the license plate
lamp assembly forward through
the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
4. Push the new bulb in and turn it
clockwise to install.
5. Reverse Steps 1 through 3 to
reinstall.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License Plate Lamp
Rear Turn Signal
Lamp/Taillamp
(LS and LT)
Rear LED Turn
Signal Lamp/
Taillamp (LTZ)
For replacement bulbs not listed
here, contact the dealer.
Bulb
Number
921
168
3157K LL
GM P/N
25874489