Controls - Crosley CRSE233TS0 Use & Care Manual

CONTROLS

Allowing Cooling Time Before Use
To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least
8 to 12 hours before placing food inside. During this cooling period, you do not need to adjust
the controls, which are preset at the factory.
Setting Cooling Temperatures

NOTE
When changing control settings, wait 24 hours for the temperature to stabilize before making
additional changes.
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's
control panel is located at the top of the refrigerator compartment.
The two digital displays on the left half of the control panel indicate the current settings of your
freezer and refrigerator compartments. Should you desire to see what the current accurate
temperature is, place a separate thermometer inside the freezer or refrigerator compartment in
the desired location.
TEMPERATURE ADJUSTMENT
To adjust the temperature to a higher or lower setting, press the Up (∧) or Down (∨) button
closest to the display. The first time you press the button, the display shows current setting you
entered. Each press of the button after that changes the setting by one.
Temperature Adjustment
If refrigerator
compartment is too warm
If refrigerator
compartment is too cold
If Freezer compartment is
too warm
If Freezer compartment is
too cold
12
(Single Digit Display - Features may vary.)
Adjust refrigerator control one degree colder by pressing up (∧)
button.
Adjust refrigerator control one degree warmer by pressing the
down (∨) button.
Adjust Freezer control one degree colder by pressing up (∧)
button.
Adjust Freezer control one degree warmer by pressing the down
(∨) button.