Epson TM-DT Series User Manual page 60

TM-DT Series Settings
Configure the Status Notification settings using EPSON TMNet WebConfig.
1
Connect the TM-DT series to the network and turn the power ON.
2
Start EPSON TMNet WebConfig from the shortcut on the desktop.
EPSON TMNet WebConfig starts.
3
EPSON TMNet WebConfig starts.
Select [Settings]-[Web service settings]-[Server access]-[Status notification].
4
The "Status Notification" screen appears.
Set the following items and click [Apply].
For TM-DT Software Ver.3.0 or later
Item
ID
Password
URL
Interval (sec)
Server Authentication
60
If you are making settings from an external device, set the TM-DT series IP address in the
address for the Web browser. The default IP address for TM-DT series is
192.168.192.168.
http://[IP address of the TM-DT series]/webconfig/
Set ID for the server-side program to identify TM-DT series. This ID
becomes the user ID used for Digest access authentication. The set
value will also be passed as an ID parameter value for the form data
posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
Not required for the sample program.
Specifies the Web server URL and path to applications.
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the previous
communication and the start of the next communication.
Sets whether or not to conduct server authentication based on the
registered certificate when conducting access by https.
Description