Epson TM-DT Series User Manual page 27

3
The "Server Direct Print Setting" screen appears.
Set the following items and click [Submit] / [Apply].
For TM-i Firmware Ver.4.0 or later
Item
Server Direct Print
ID
Password
URL
Server 1/
Server 2/
Server 3
Interval(s)
Authenticate Server
For TM-i Firmware Ver.3.x or earlier
Item
Server Direct Print
ID
Password
URL
Interval(s)
Select the [Enable].
Set ID for the server-side program to identify TM-i series. This ID
becomes the user ID used for Digest access authentication. The set
value will also be passed as an ID parameter value for the form
data posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
The Digest access cannot be authenticated for user IDs without
passwords. To authenticate the Digest access, configure a
password that is not empty.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of the Web server]/Test_print.php
Click the [Access Test] to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the
previous communication and the start of the next communication.
Sets whether the server authentication is performed with the
registered certificate when accessed through https.
Select the [Enable].
Set ID for the server-side program to identify TM-i series. This ID
becomes the user ID used for Digest access authentication. The set
value will also be passed as an ID parameter value for the form
data posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
The Digest access cannot be authenticated for user IDs without
passwords. To authenticate the Digest access, configure a
password that is not empty.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of Web server]/Test_print.php
Click the [Access Test] to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the
previous communication and the start of the next communication.
Chapter 2 Sample Program
Description
Description
2
27