Rocking Your Vehicle To Get It Out; Recovery Hooks - Chevrolet 2010 Tahoe Owner's Manual

Chevrolet 2010 tahoe automobile owner's manual
Hide thumbs Also See for 2010 Tahoe:
Table of Contents

Advertisement

Turn the steering wheel left and right to clear the area
around the front wheels. For four-wheel-drive vehicles,
shift into Four Wheel High or, if the vehicle has a
two speed automatic transfer case, Four Wheel Low.
For vehicles with StabiliTrak
part of the system off. Shift back and forth between
R (Reverse) and a forward gear, spinning the wheels as
little as possible. To prevent transmission wear, wait
until the wheels stop spinning before shifting gears.
Release the accelerator pedal while shifting, and press
lightly on the accelerator pedal when the transmission is
in gear. Slowly spinning the wheels in the forward and
reverse directions causes a rocking motion that could
free the vehicle. If that does not get the vehicle out after
a few tries, it might need to be towed out. Recovery
hooks can be used, if the vehicle has them. If the
vehicle does need to be towed out, see Towing Your
Vehicle on page 5 43.
5-32
®
, turn the traction control
These hooks, when used, are under a lot of force.
Always pull the vehicle straight out. Never pull on
the hooks at a sideways angle. The hooks could
break off and you or others could be injured from
the chain or cable snapping back.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 suburban 15002010 suburban 25002010 suburban

Table of Contents