Table of Contents
Advertisement
Using the headphones
14 | CX 150BT
If Bluetooth is activated and the headphones cannot find a
paired Bluetooth device within a few minutes, you hear the
voice prompt "Lost connection". The LED flashes red. The
headphones switch to standby mode.
Switching the headphones off
OFF
Hold
3s
▷
Press the multi-function button for 3 seconds.
You hear the voice prompt "Power off" and the LED flashes red
3 times.
The headphones automatically switch to idle mode if no paired
Bluetooth device can be found within 5 minutes. You can wake
up the headphones from idle mode by pressing the multi-func-
tion button for approx. 3 seconds.
Retrieving information on the battery
charge status
When the headphones are connected to your Bluetooth device, the
battery charge status can be displayed on the screen of your smart-
phone (depending on the device and operating system used).
You can check the battery charge level of your headphones manually
by pressing the volume
"More than xx % battery left".
Voice prompt
"Recharge headset"
"More than xx % battery
left"
-
button once. You hear the voice prompt
Meaning
The rechargeable battery is empty.
Recharge the rechargeable battery
9).
In addition, the LED flashes red.
The remaining battery charge is
displayed as a percentage.
3x
"Power off"
(>
Advertisement
Table of Contents
