Table of Contents
Advertisement
Using the headphones
Inserting the earphones into the ears
▷
Put the cable around your neck.
▷
Assign the right earphone to your right ear and the left earphone
to your left ear.
▷
Press the earphones lightly into the ear canal.
If the earphones fit too loose in the ear canal and fall out easily:
▷
Try larger ear adapters.
If you feel immediate pressure when wearing the earphones:
▷
Try smaller ear adapters.
Switching the headphones on
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷
Before putting the headphones on, adjust the volume
to a low level
▷
Do not continuously expose yourself to high volume
levels.
ON
Hold
3s
▷
Press the multi-function button for 3 seconds.
The headphones switch on. You hear the voice prompt "Power on"
and the LED display flashes blue 3 times.
If a paired Bluetooth device is within the transmission range, you
hear the voice prompt "Device (1) connected". The LED flashes
blue 3 times.
Make sure that Bluetooth is already activated on your Blue-
tooth device when switching on the headphones.
R
(>
15).
3x
"Power on"
3x
"Device (1)
connected"
CX 150BT | 13
Advertisement
Table of Contents
