Timer And Sleep Operation - Sharp XL-DAB9H Operation Manual

Timer and sleep operation

XL-DAB9H
ENGLISH
Timer playback:
The unit turns on and plays the desired source (CD, DAB or FM) at
a preset time.
Sleep operation:
The radio or disc can be turned off automatically.
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 10).
2 Load a disc to be played.
You can use buttons on the remote control instead of the operation
lever.
E-33
Timer playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select the desired source
(CD, DAB or FM).
Depending on the source, insert a disc or tune in to a station.
3
Adjust the volume using the volume control.
Do not turn the volume up too high.
4
Press the TIMER button. Within 8 seconds, press the MEM-
ORY/SET button.
5
Within 1 minute, move the operation lever toward PRESET
or PRESET to specify the hour to start, then press the
MEMORY/SET button.
6
Within 1 minute, move the operation lever toward PRESET
or PRESET to specify the minutes to start, then press
the MEMORY/SET button.
The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
" " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
05/7/12 XL-DAB9H(H)E4.fm TINSZA071SJZZ