Listening To The Memorised Fm Station - Sharp XL-DAB9H Operation Manual

Hide thumbs Also See for XL-DAB9H:
Table of Contents

Advertisement

Listening to the memorised FM station

XL-DAB9H
ENGLISH
Memorising a station
You can store 40 FM stations in memory and recall them at the push
of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Listening to the FM" on page 26.
2
Press the MEMORY/SET button to enter
the preset tuning saving mode.
3
Within 5 seconds, move the operation le-
ver toward PRESET
or PRESET
lect the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the MEMORY/
SET button to store that station in memo-
ry.
If the "Memory" and preset number indicators go out before the
station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
E-27
To recall a memorised station
Move the operation lever toward PRESET
than 0.5 seconds to select the desired station.
To select a preset station with the direct number buttons:
Press the corresponding number ("0" - "+10").
Example:
To select 28, press "+10", "+10" and "8".
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
to se-
set memory scan)
1 Move the operation lever toward PRESET
more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Move the operation lever toward PRESET
when the desired station is located.
To clear a memorised station
1 Recall the memorised station.
2 Whilst it is displayed, press the MEMORY/SET button.
3 Within 5 seconds, press the CLEAR button.
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the MEMORY/SET button and move the
operation lever toward PRESET
button until "Preset Clear" appears.
05/7/12
XL-DAB9H(H)E3.fm
or PRESET
for less
or PRESET
for
or PRESET
again
, press the ON/STAND-BY
TINSZA071SJZZ

Advertisement

Table of Contents
loading

Table of Contents