Table of Contents
Advertisement
Listening to the DAB
About DAB (Digital Audio Broadcasting)
Digital Audio Broadcasting is a digital transmission system where
audio signals are converted to digital signals for broadcasting.
DAB is broadcast as a group of data called multiplex (ensemble)
which may contain one or more stations (services). Each station
contains a primary service and there may be one or more secondary
services.
This allows several programmes or services to be transmitted on a
single frequency.
DAB SIGNAL
MULTIPLEX
(ENSEMBLE)
Auto tune
When turned on for the first time, the unit scans radio stations
automatically to create a station list.
12-digit solid blocks show the progress of scan.
The number of received stations is displayed.
After the scan:
The stations will be stored in alphanumeric order and the first station
on the list will be selected and you will hear it through the speakers.
To listen to other stations, see "Selecting a station in the station
list" on page 19.
You can arrange the order of stations in the station list (see page 20).
Notes:
If no station is found, "No station" appears.
Up to 99 appears for total received stations.
SERVICES
Retuning the unit (Auto tune)
You can retune the radio when you move the unit to other areas or
SERVICE
add multiplex channels to the station list.
COMPONENTS
(STATIONS)
1
Press the TUNER (BAND) button until
"DAB" appears on the display.
2
Press the AUTO TUNE button.
All frequencies of Band III and L-Band are scanned. This
may take a few minutes.
You can cancel the Auto tune by pressing the AUTO TUNE
button again.
After the scan:
The unit will return to the station you were listening to and you will
hear it through the speakers. All the stations found are now stored in
the unit.
05/7/12
Total received stations
XL-DAB9H(H)E2.fm
TINSZA071SJZZ
XL-DAB9H
ENGLISH
8
E-18
Advertisement
Table of Contents
