Test Printing
After settings of the Server, Printer, and SAP GLM are completed, always be sure to perform a test
printing from the application that is actually being used before starting operations.
If desired printing results is not obtained, review the setting content of the Server, Printer, and SAP
GLM.
When this happens
Phenomenon
Media Size Error occurs
Fails to print in spots
Countermeasure
• Check the settings of the Media used and of the TM-
C3500 Series Printer, and the settings of the SAP GLM.
• If not resolved, ask the Server administrator, and check
the Server settings.
31
Chapter 2 Setting Up the Printing Environment
Ref.
•
page
17,
page 28
•
page 11