Related Manuals for Neilsen CT1085
Summary of Contents for Neilsen CT1085
- Page 1 1/4" AIR ANGLE DIE GRINDER CT1085 Ref no. LT222 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. 1/4" AIR ANGLE DIE GRINDER Product description: Model: CT1085 (Ref no. LT222) Applicable EC Directives: EC Machinery Directive 2006/42/EC Harmonized standards EN ISO 11148-9：2011 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS WARNING– When using tools, basic precautions should always be followed, including the following: General To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Work area a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. - Page 4 footing and balance enables better control of the tool in unexpected situations. f. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use. g. Always wear eye protection. Wear ANSI-approved safety goggles. h.
- Page 5 f. Maintain the tool with care. A properly maintained tool is easier to control. g. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the Air Angle Die Grinder serviced before using.
-
Page 6: Specifications
a. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. - Page 7 INITIAL TOOL SET UP Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
- Page 8 and filter for best service, as shown in the diagram above. An in-line shut off valve is an important safety device because it controls the air supply even if the air hose is ruptured. Note: If an automatic oiler system is not used, add a few drops of Pneumatic Tool Oil to the airline connection before operation.
- Page 9 parts. If any problems are found, do not use tool until repaired. Tool Set Up To prevent serious injury from accidental operation, Detach the air supply, safely discharge any residual air pressure in the tool, before installing bits or making any adjustments to the die grinder. Specific Operating Instructions 1.
- Page 12 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...