Cooling System (Engine); When To Check And What To Use; How To Check And Add Fluid - Chevrolet 2009 Corvette Owner's Manual

When to Check and What to Use

Refer to the Maintenance Schedule for the proper fluid
to use. See Recommended Fluids and Lubricants on
page 6-12. The fluid requires changing every two years.
See Additional Required Services on page 6-6.

How to Check and Add Fluid

Visually check the clutch fluid reservoir to make sure the
fluid level is at the MIN (minimum) line on the side of the
reservoir. The hydraulic clutch fluid system should be
closed and sealed.
Do not remove the cap to check the fluid level or to top-off
the fluid level. Remove the cap only when necessary to
add the proper fluid until the level reaches the MIN line.
5-32
The hydraulic clutch fluid
reservoir cap has this
symbol on it. See Engine
Compartment Overview
on page 5-14 for reservoir
location.

Cooling System (Engine)

The cooling system allows the engine to maintain the
correct working temperature.
7.0L Engine shown, 6.2L Engine similar
A. Electric Engine Cooling Fan
B. Coolant Surge Tank with Pressure Cap