Parts Included - GE JVM3162RJSS Installation Instructions Manual

Installation Instructions - Straight Mounting Plate
DAMAGE – SHIPMENT INSTALLATION
• If the unit is damaged in shipment, return the
unit to the store in which it was bought for repair or
replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other
than the customer), repair or replacement must
be made by arrangement between customer and
installer.

PARTS INCLUDED

HARDWARE PACKET
Part
Wood screws (1/4" x 2")
Toggle bolts (and wind
nuts) (3/16" x 3")
Self-aligning machine
screws (1/4" - 28 x 3
1/4")
Nylon Grommet (for
metal cabinets)
Tapping screws (for
attaching the damper
duct connector)
One power cord clamp
and One dark-colored
mounting screw (to hold
the power cord)
You will find the installation hardware contained
in a packet with the unit. Check to make sure you
have all these parts.
NOTE: Some extra parts are included.
6
ADDITIONAL PARTS
Part
Quantity
2
2
2
1
3
1
Quantity
Top Cabinet 1
Template
Rear Wall 1
Template
Installation 1
Instructions
Separately 2
Packed Grease
Filter
Mounting Plate 1
(for supporting
the microwave
Oven)
Cover plate (for 1
Room Venting
installation)
31-7000173 Rev. 0