Advertisement
INSTALLATION & SETUP
Bef ore connecting the appliance to a power source, let it stand
upright for approximately 2 hours. This will reduce the possibility
of a malfunction in the cooling system from handling during
transportation
LOCATION
The water dispenser should be placed on a firm, even foundation to
minimize noise and vibration.
Do not place the dispenser in direct sunlight or near other heat producing
appliances.
To avoid accidental water damage, locate it away from furniture or other
appliances.
The unit must be placed within reach of a properly-rated grounded socket.
Never place any obstacles around the air inlet or outlet of the unit.
Allow a minimum 10 inch clearance on all sides for efficient operation.
This unit should work in temperatures ranging from 50-109
OPERATION
1.
Remove the sticker or bottle cover from the bottle and place the bottle on
top of the water dispenser. Do not plug the power cord in or turn on the
heating switch until water runs from the hot water tap.
2.
Insert the plug into an outlet and then turn on the switch. Indicators light
up accordingly once the machine works.
3.
Once the bottle is empty, remove and replace with a new bottle.
CLEANING & MAINTENANCE
Unplug the unit from the electric outlet before performing any maintenance or
servicing the product.
CLEANING THE HOUSING
Use a soft, damp cloth to wipe the body clean. Clean the drip tray and
storage cabinet as needed.
7
.
A Name You Can Trust
°
Fahrenheit.
Advertisement
