Page 1
WAT30B Water Dispenser OWNERS MANUAL Read and save these instructions.
Page 2
Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
Never remove the round grounding prong from the plug and never use a two-prong grounding adaptor. Use of an extension cord is not recommended. Do not pull or place strain on the power cord when moving the appliance. http://www.NewAir.com...
Altering or cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire, or loss of property and/or life, and will void the warranty. If the power cord is damaged, it must be replaced by an electrician or specialized technician authorized by the manufacturer in order to prevent fire.
INSTALLATION & SETUP Bef ore connecting the appliance to a power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation LOCATION The water dispenser should be placed on a firm, even foundation to minimize noise and vibration.
Wait until the unit is able to cold water. hot or cold water in a prepare more hot or cold short amount of time. water. There is no water The water bottle may Replace the water bottle. flow. be empty. http://www.NewAir.com...
Page 9
Problem Possible Causes Solution Bottle supporter inlet Remove the seal or cover may be blocked by a and reinstall the bottle. bottle seal. The bottle The bottle may be Replace with a new bottle. supporter is broken. leaking. The unit is noisy. The unit is not on a flat Place the machine on a flat and level surface.
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.