Load Control Menus - Kohler 48RCL Operation

3.19 Load Control Menus

The Load Control menu displays the status of the load
management inputs and outputs, and allows a test of the
load management output relays. This menu appears
only if a load management device is connected.
Generator current is displayed as a percent of the
maximum generator capacity. The load management
Load ---->
Control
Figure 3-23 Load Control Status Menu
48 Section 3 RDC2 Controller Operation
Generator
Current: 123 %
Load ---->
Control 1
<---- Return
device adds and sheds loads based on the generator
current.
The test function cycles the relays in the order of their
priority. For detailed
management operation, refer to TT-1609, provided with
the load shed kit, or TP-6807, RXT Transfer Switch
Operation and Installation Manual.
Test Outputs
Push Select (blinking)
Input 1:
In/Active
Input 2:
In/Active
Output 1:
Add/Shed
Output 2:
Add/Shed
Output 3:
Add/Shed
Output 4:
Add/Shed
Output 5:
Add/Shed
Output 6:
Add/Shed
<---- Return
information about load
tp6810
TP-6810 7/16