Table of Contents
Advertisement
Rejecting Fax Reception
You can set the machine to reject faxes with no sender information or those from specific senders.
Select one of the following conditions to reject faxes.
• Faxes with no caller identification.
• Faxes from senders not registered to the coded speed dial codes.
• Faxes from senders registered in the machine as rejected numbers.
Select a fax rejection condition following the procedure below.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the MENU button.
The menu screen is displayed.
3.
Select
Setup, then press the OK button.
4.
Select
Device settings, then press the OK button.
5.
Use the
button to select FAX settings, then press the OK button.
6.
Use the
button to select Security control, then press the OK button.
7.
Use the
button to select FAX reception reject, then press the OK button.
8.
Use the
button to select ON, then press the OK button.
9.
Use the
button to select the fax rejection condition, then press the OK button.
No sender info.
Rejects faxes with no caller identification.
Coded dial unset
Rejects faxes from the senders not registered to coded speed dial codes.
Rejected numbers
Rejects faxes from the senders registered in the machine as rejected numbers.
For details on how to register the rejected number, see
Note
When the machine rejects reception, Reception rejected. is displayed on the LCD.
Faxes with no caller identification are also rejected when the setting other than No sender info. is
selected.
Registering the Rejected Number
Register the rejected number following the procedure below.
1.
When the confirmation screen to register the rejected number is displayed, use the
select Yes, then press the OK button.
Registering the Rejected
Number.
button to
Hide quick links:
Advertisement
Table of Contents
