Searching For Digital Television Channels From A Satellite Automatically - Grundig 48 VLE 555 BG Manual

­ s peCiAl­settinGs
searching­for­digital­television­
channels­from­a­satellite­
automatically
Satellite data changes frequently, new channels
are constantly being added. You should
therefore perform an automatic search from time
to time.
This searches all transponders for new channels.
1 Open the menu with »menu«.
2 Select the menu item »SOURCE SETUP« with
» « or » « and press »oK« to confirm.
v Λ
– T he »SOURCE SETUP« menu appears.
SOURCE SETUP
Source
Automatic Channel Search
Digital Manual Tuning
Antenna Settings
Program Table
Signal Information
Automatic Service Update
CA -Module
HBB TV Settings
3 Select the line »Source« with »
and press »oK« to confirm.
Select the input source »Satellite« with »
>
» «, » « or »
v Λ
firm.
4 Select the line »Automatic Channel Search«
with » « or »
v Λ
– T he menu appears.
5 Select the line »Select Satellites« with »
» « and press »oK« to confirm.
Λ
– T he »SELECT SATELLITE« menu appears.
6 Select a satellite with »
»oK« to confirm.
­ 4 8
enGlish
­ - ---------------------------------------------------------------------------------------------------------
Satellite
Off
Not Inserted
Exit
Back
« or »
v
« and press »oK« to con-
« and press »oK« to confirm.
« or » « and press
v Λ
7 Select the line »Scan Mode« with »
» «.
Λ
Select the scan mode with »
(for unencrypted channels, for encrypted
channels only, or both).
8 Select the line »Service Type« with »
» «.
Λ
Use »
want to search for television channels (TV)
only, radio stations only (Radio) or both
(Radio + TV).
9 Select the line »Network Search« with »
or »
Λ
Select the option »On« with »
– I f the »Network Search« is set to »On«,
08.08.2012
15:46
the data will be accessed via the new tran-
sponder of the network which has been
set.
10 Start the scan with »
OK
note:
If the previously stored channels should be
7
retained in the channel list and the new
channels found be added to it, then press
» « (green).

If »

will be deleted from the current channel list.
– T he »Results« menu appears, and the scan
for TV channels begins.
– D epending on the number of television
channels received, this can easily take a
few minutes.
– T he search is complete as soon as the
« »PROGRAM TABLE« appears.
Λ
note:
<
«,
You can abort the search by pressing
7
»exit«.
11 Press »exit« to end the setting.
« or
v
< >
« or » « to select whether you
«.
« (red).

« (red) is pressed, the saved channels
« or
v
< >
« or » «
« or
v
«
v
< >
« or » «