Digi Link; The Digi Link Functions On Your Television - Grundig 48 VLE 555 BG Manual

operAtion­usinG­externAl­DeviCes
DiGi­linK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are connect-
ed to the »hDmi« sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected support
CEC. Read the operating manual for the external
device to find out how to activate the correspond-
ing function.
the­DiGi­linK­functions­on­your­
television
switching­on­the­television­
automatically­from­standby
If the external device (e.g. Blu-ray player) is
switched on, the television also switches on and
the appropriate HDMI preset is selected auto-
matically.
Depending on the features of the external de-
vice, the external device (e.g. AV receiver) can
be switched on alone, the television stays in
standby.
Automatic­selection­of­the­hDmi­
preset­on­the­television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
selecting­the­menu­language
The television menu language is automatically
s elected on the external device (e.g. DVD player).
The external device must support this function.
switching­off­the­external­device­
automatically
If you switch your television to standby, the ex-
ternal device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television set.
­ 4 0
ENGLISH
searching­for­and­activating­­
external­devices
You can connect up to 11 devices with DIGI LINK
functions to your television.
1 Open the Tools menu with »tools«.
2 Select the menu item »CEC« with »
» « and press »oK« to confirm.
Λ
– T he »HDMI CEC Device List« appears.
3 Start the device search with »
– T he devices found are displayed in the
menu.
4­
Select the device for operation with »
< >
» «, » « or » « and press »oK« to mark it.
Λ
– I f the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
5 Press »exit« to end the setting.
­-----------------------------
« or
v
« (red).

«,
v