Connecting A Pc; Selecting Presets For The Pc; Settings For Pc Mode - Grundig 48 VLE 555 BG Manual

operAtion­As­A­pC­monitor
Connecting­a­pC
1 Connect the »pC-in« socket on the television
to the corresponding socket on the PC using
a VGA cable (video signal).
2 Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable (audio signal).
note:
Adjust your PC to the monitor (for example,
7
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
selecting­presets­for­the­pC
1 Press »
« and use »
to select the preset »PC« and press »oK« to
confirm.
settings­for­pC­mode
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« item with
» « or » « and press »oK« to confirm.
v Λ
– T he »SOURCE SETUP« menu appears.
3­ Select the function or setting with »
» «, and then use »
Λ
implement it.
­ 4 6
enGlish
<
«, » «, » « or »
v Λ
« or
v
< >
«, » « or » «, » « to
v Λ
Source
Auto Ajust
Extended settings
Auto Ajust Mode
Position
Size
Phase
>
«
Options:
– » Auto Ajust« for automatic PC configura-
tion.
– » Auto Ajust Mode«, select the option
»On« if the configuration should be imple-
mented automatically in PC mode.
– » Position« to configure the horizontal and
vertical picture position.
– » Size« to set the cycle frequency.
– » Phase« to eliminate flicker, unfocused
pictures or horizontal interference.
4 Press »exit« to end the setting.
­ - ---------------------------------------------------------
SOURCE SETUP
50H - 50V
Exit
Back
20.09.2010
15:46
PC
On
0
30