Plustek SmartOffice PL4080 User Manual page 21

2. Adjust the paper width slider for the paper size you are using. The paper width
slider should be gently touching both sides of the documents.
DO NOT load more than 50 sheets of paper
2
(70 g/m , 18 lb.) to the ADF.
Paper scanned from the ADF must be a
minimum of 9 x 5.08 cm (3.55" x 2", W x L).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
Attention
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in
so tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
18