Installations Of The Unit Into The Cabinet - LG JW-Q18WUXA1 Owner's Manual

12
INSTALLATION
Installations of the unit into
the Cabinet
1
Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier on
each side of the case.
Screw
CAUTION
!
• The unit is heavy. Use an assistant to help
lift the unit and set it in place. Lifting and
maneuvering the unit by yourself could
result in injury.
2
Stuff the foam around the unit to prevent air
and insects from getting into the room.
3
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown. (for some models)
4
Screw
5
The Foam
(Around the unit)
6
Connect the wire harness from the front
grille assembly to the air conditioner.
Attach the front grille assembly to the cabinet
by inserting the grille tabs into the slots on
the front of the cabinet. Push the grille in until
it snaps into place.
NOTE
• Carefully guide the vent control lever
through the grille as you push the grille in.
Open the air inlet grille and secure the front
grille assembly with 2 screws (L:10 mm).