Installations Of The Unit Into The Cabinet - LG W121CE SL0 Owner's Manual

Installations of the unit
into the Cabinet
1
Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier on
each side of the case.
Screw Screw
CAUTION
• The unit is heavy. Use an assistant to help
lift the unit and set it in place. Lifting and
maneuvering the unit by yourself could result
in injury.
2
Stuff the foam around the unit to prevent air
and insects from getting into the room.
3
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown. (for some models)
16
Screw Screw
The Foam The Foam
(Around the unit) (Around the unit)
4
Connect the wire harness from the front grille
assembly to the air conditioner.
5
Attach the front grille assembly to the cabinet
by inserting the grille tabs into the slots on the
front of the cabinet. Push the grille in until it
snaps into place.
NOTE
• Carefully guide the vent control lever through
the grille as you push the grille in.
6
Remove air filter from the front grille by pulling
the filter forward and then up slightly.
Insert 2 screws (L:10 mm) through the front
grille.
EN