Alignment - Bosch WNA244X0GC Instruction Manual And Installation Instructions

Positioning and connecting
en
Drainage into a plastic pipe with
■
rubber bushing or into a drainage
*
pit
The plastic pipe is not
Note:
standard accessory, available from
specialist dealers.

Alignment

Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
Loosen the lock nuts using a
1.
wrench, by turning it in a clockwise
direction.
* depending on the model
20
Check the alignment of the
2.
appliance with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
Tighten the lock nut against the
3.
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.