Automatic Operation - Panasonic CS-A9KKD-2 Service Manual

12.3.3 Soft Dry Operation Time Diagram (For CS-A28KKD-2 CU-A28KKD-2)

12.4 Automatic Operation

•
Automatic operation can be set using remote control.
•
This operation starts to operate with indoor fan at SLo speed for 25 seconds to judge the intake air temperature.
•
After judged the temperature, the operation mode is determined by referring to the below standard.
•
Then, the unit starts to operate at determined operation mode, until it is switched off using remote control, with
the setting temperature as shown in table below.
23°C
Intake Air
Temperature 20°C
Cooling Operation
Soft Dry Operation
Heating Operation
Cooling Operation
Soft Dry Operation
Heating Operation
Setting Temperature (Standard)
25°C
22°C
21°C
55