Agilent Technologies E6001A User Manual page 150

Sample Sessions: Other Mini-OTDR
6
Modes
Sample Sessions
E6000C Mini-OTDR User's Guide, E0302
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
"Sample Sessions: Measuring a Trace" on page 81 and
"Sample Sessions: Analyzing an Existing Trace" on
page 107 showed what you can do in OTDR Mode of the
Mini-OTDR. "Sample Sessions: Instrument
Configuration" on page 129 showed you how to
configure your Mini-OTDR.
This chapter shows you how to use other modes of the
Mini-OTDR. The available modes are seen as options on
the Applications Screen (see "The Applications Screen"
on page 39).
The following sample sessions show you how to:
• Recall Settings in EasyMode,
• Test Multiple Fibers,
• Use the Fiber Break Locator,
• Use Source Mode,
• Use Source Mode with the Power Meter and Visual
Fault Finder Submodules.
If you have not used a Mini-OTDR before, you should first
read the previous sections. The equipment used in the
following Sample Sessions is the same as before.
6
149