Haier ESA406M User & Care Manual page 18

STARTING THE AIR CONDITIONER cont.
SPEED
1. Press FAN SPEED until; you see the indicator light come on next to the
desired setting.
2. Choose High, Med, Low or Auto Cool
HIGH—For maximum cooling
MED—For normal cooling
LOW—For minimum cooling
AUTO COOL – Adjusts the fan speed automatically to provide ideal cooling
based on the room temperature.
TIMER
To set the air conditioner to turn off between 1 hour and 24 hours (The air
conditioner must be ON to set):
1. Press TIMER. Timer Off indicator light will flash. The display will show the
remaining hours before the air conditioner will turn off.
2. Press the TEMP/TIME up or down arrow button to change the delay time
from 1 hour to 24 hours.
3. After 5 seconds, Timer Off indicator light will remain on. The display will
show the left time to Timer Off.
To set the Timer to turn on the air conditioner, keeping the previous settings:
1. Turn on the unit.
2. Press TIMER. Timer On indicator light will flash. The display will show the remaining hours
before the air conditioner will turn on.
3. Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24
hours.
4. Timer On indicator light will remain on.
TO SET THE TIMER TO TURN ON THE AC, CHANGING THE PREVIOUS SETTINGS:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Cool, Energy Save or Dehum.
3. For Fan or Dehum mode,adjust the fan speed to High,Med or Low. For Cool or Energy Save
mode,adjust the fan speed to High,Med, Low or Auto Cool.
4. Adjust the temperature between 61°F and 86°F (16°C and 30°C).
NOTE: In Fan mode, the temperature cannot be set.
5. Press TIMER. Timer On indicator light will flash. The display will show the remaining hours
before the air conditioner will turn on.
6. Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24
hours.
7. Timer On indicator light will remain on.
PAGE 16 USING YOUR AIR CONDITIONER
86
˚F/˚C
hr
MODE SPEED TIMER
FAN HIGH ON
COOL MED OFF
ENERGY LOW SLEEP
SAVE
DEHUM AUTO COOL
TEMP/TIME
FILTER
RESET
CLEAN FILTER
POWER
AUTO RESTART