EFORE EGIN What is included 1 x LED-RAIN36 1 x Power cable (1 m) and 1 x Linking cable (1.5 m) Warranty Card Users Manual Unpacking Instructions Immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
Ultra bright LEDs Built in strobe program Low power consumption Up to 100,000-hour LED life span Master/Slave mode OPTIONS Programmable: Any universal DMX-512 controller DMX Channel Summary HANNEL LED-RAIN36 User Manual NTENSITY ONTROL OF Dimmer Strobe 2006-07-14/15:25...
Product Overview AC Voltage Switch Fuse Power connection LED-RAIN36 User Manual Hanging yoke DMX Connectors DMX dipswitches: DMX channel addressing Power link 2006-07-14/15:25...
1. Align the clamp screw with the center hole on the yoke and tighten. 2. Verify the structure can hold 10 times the weight of all to-be installed fixtures. 3. Adjust the angle on the yoke arm as necessary. LED-RAIN36 User Manual NTERNATIONAL Live...
PERATING NSTRUCTIONS The LED-RAIN36 is a DMX-512 controllable, pinspot made up of highly efficient and super bright white LEDs. The LED-RAIN36 can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 2 channels. Master/Slave & Stand-Alone Mode The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In this mode, the first unit in the daisy chain will automatically command all other units following.
9 & 3 9 & 2 9 & 1 Only the number of the dipswitch listed in this column is turned ON all others remain OFF LED-RAIN36 User Manual (adjusts either speed or intensity) DJUSTMENT ROGRAM UNCTION Light Intensity > >>...
In this mode you will be able to control each individual trait of the fixture and each fixture independently. The LED-RAIN36 uses 2 channels of control. 1. Enable DMX control by setting dipswitch # 10 to the ON position. Use dipswitches 1 through 9 to address each fixture accordingly.
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’)
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.