Panasonic PV-D301 Service Manual page 83

2. Put the unit into the service mode "I. TRACKING FIX" to defeat
Auto Tracking. Refer to
DIAGNOSTIC SYSTEM)
3. Remove the Cassette Lid Cover from the Cassette Tape or the
Alignment Tape.
Equipment Required:
Dual Trace Oscilloscope
VHS-C Alignment Tape (VFMS0004H6C)
VHS-C Alignment Tape (VFMW0001C)
Screwdriver Set (Purchase Locally)
TP Board
TP Adjustment Cable 40P (LSUP0005A)
TP Adjustment P.C.B. 40P (VFKW0123B)
TP Clip 36P (LSUP0005C)
8.2.2.1.1. ENVELOPE OUTPUT ADJUSTMENT
The height of the S and T Posts replacement part is preset at the factory.
Purpose:
To achieve a satisfactory picture and secure precise tracking.
Fig. M2-1
"SERVICE MODE SPECIFICATION (SELF-
" in "SERVICE NOTES."
Fig. M2-2
83