electrodes as shown below.
Note:
Do not glue the replacement leadless component to the circuit
board.
6.1.12. SPECIAL NOTE
All integrated circuits and many other semiconductor devices are electrostatically sensitive and
therefore require the special handlings techniques described under the "ELECTROSTATICALLY
SENSITIVE (ES) DEVICES" section of this service manual.
6.1.13. MODEL NO. IDENTIFICATION MARK
Use Marks shown in the chart below to distinguish the different models included in this Service
Manual.
Note:
1. For distinguishing marks A from AA, D from DA, etc., / refer to
"MODEL NO. IDENTIFICATION MARK IN THIS SERVICE
section.
2. Refer to Item 3 of Schematic Diagram Notes of Schematic Diagram
and Circuit Board Layout Notes, for Mark "Z."
6.2. IC, TRANSISTOR AND CHIP PART INFORMATION
Fig. 6-3
28
MANUAL"