Rear Panel - Yaesu FTV-901R Instruction Manual

( 1 ) 4
30 MHz UNIT and ANTENNA JACK
When the optional 430 MHz unit i s in stalled, the
430 MHz antenna should be connected here. An
N-type connector is utilized, for improved U HF
performance.
(2) 144
MHz UNIT and ANTENNA JACK
The 1 44 MHz unit i s built in, and the 2 meter
antenna should be in stalled here.
(3) 50 MHz UNIT and ANTENNA JACK
When the optional 50 MHz unit 1 s in stalled, the
50 MHz antenna should be connected to thi s jack.
( 4 )
POWER cord
This is the connection to the AC po wer line.
(5) GND
For be st performance,
dangerou s electrical shock, a good earth gro und
should be connected here, u sing a short, heavy,
braided cable.
(6) RF IN
This jack should be connected to the FT-901 DM
RF O UT j ack, using the supplied Cable A. Do
NOT connect thi s jack to the FT-901 DM ANT
jack.

REAR PANEL

and protection from
-
(7) ACC
Thi s jack should be connected to the FT-901 DM
ACC jack, u sing the supplied Cable C.
(8)
HF ANT
The HF antenna should be connected to thi s jack.
(9)
OUTPUT
Thi s jack should be connected to the FT-901 DM
ANT jack, u sing the supplied cable
(10) EXT RCV
When an external receiver i s u sed, it s antenna jack
should be connected
connection will be made when the FUNCTION
switch is set to EXT RCV. (Connection cable not
supplied)
5 -
B.
to thi s terminal. The