Troubleshooting - Greenlee GATOR CK1240 Instruction Manual

Troubleshooting

Problem
Tool is inoperative.
Dies stop during operation.
Tool loses oil.
Greenlee / A Textron Company
CK1240 and CK1240C Crimping Tools
Probable Cause
Dirt, contaminants, etc., in ram area
of tool.
Tool components worn or damaged.
Oil level is low.
Air in hydraulic system.
Damaged internal seal.
Oil plug not installed properly.
10
Probable Remedy
Clean tool.
Return tool to an authorized
Greenlee service center.
Check oil level. Refill reservoir.
Pull trigger and hold retract button
simultaneously. Hold for approximately
10 seconds.
Return tool to an authorized
Greenlee service center.
Refill reservoir and replace plug.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070