Table of Contents
Advertisement
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ...................................... 3-5
Identification ................................................................... 6
Specifications ................................................................. 6
Operation ....................................................................... 7
Die Selection .................................................................. 8
Connector Selection ....................................................... 8
Maintenance ................................................................... 9
Periodic Pressure Relief Valve Check ........................... 9
Troubleshooting ........................................................... 10
Disassembly ................................................................. 11
Assembly ...................................................................... 12
Illustrations and Parts List ...................................... 13-18
Greenlee / A Textron Company
CK1230 and CK1230C Crimping Tools
Description
The CK1230 Hydraulic Crimping Tool is a hand-held,
self-contained tool intended to crimp aluminum and
copper connectors onto electrical cable.
The CK1230C has a PVC-covered crimping head.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge.
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Greenlee Textron Inc.
AVIA is a registered trademark of Avia International.
Mobil is a registered trademark of Mobil Oil Corporation.
NUTO is a registered trademark of Exxon Corporation.
Tellus is a registered trademark of Shell Oil Company.
KEEP THIS MANUAL
2
CK123011
120 Volt Crimping Tool
CK1230C11
120 Volt Crimping Tool
with PVC-covered Head
CK123022
230 Volt Crimping Tool
CK1230C22
230 Volt Crimping Tool
with PVC-covered Head
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Advertisement
Table of Contents
